Vapamore MR-100 Primo Bedienungsanleitung PDF herunterladen (Seite 5)

andle safety latch.

FILLING & OPERATION

Fig. 7

Fig. 8

The red light will illuminate when the power button is

depressed indicating the unit is heating. The green light

will illuminate indicating the unit is fully heated and

ready for use (approximately 11 minutes). The green

light will cycle on and o with the heater to maintain full

temperature during use. (Fig.10)

Fig. 9

Fig. 10

Green

light

Red

light

Fig. 11

er fill

NOTE:

Do not ov

Do not over ll

To ll the water tank, switch the steam cleaner o and remove the plug from the wall

outlet. Allow steam cleaner to cool down before removing water tank cap. Unscrew the

water tank cap (Fig.7) by pressing the cap down and simultaneously turning counter

clockwise. Use the supplied funnel and the measuring cup lled to the top line marked

700ml two (2) times to equal 1.4 liters of water. (Fig.8)

Replace the water tank cap by pressing down on the cap

and simultaneously turning it clockwise. Make sure the

cap is fully tight to prevent any steam from leaking out.

If steam leaks from the cap area turn the Vapamore o

and once cooled down tighten cap further.

Do not exceed the maximum of 1.4 liters

of water when lling the water tank. 1.4 liters is equal to

lling the measuring cup to the 700ml mark tow (2) times.

Plug the Vapamore into a proper wall outlet and switch

to the on position by pressing the on / o switch. (Fig.9)

Never aim steam directly at people,

animals, plants, or electrical systems. There is a risk of

scalding or electrical shock.

GO TO VAPAMORE.COM TO SEE THE MR-100 PRIMO INSTRUCTIONAL VIDEO

1 2 3 4 5 6 7 8 9 10 ... 13 14

Keine Kommentare

Vapamore MR-100 Primo Bedienungsanleitung Seite 5