Vapamore MR-1000 Forza Bedienungsanleitung PDF herunterladen (Seite 4)

GETTING STARTED

Vapamore

if over pressure or over temperature is detected.

GO TO VAPAMORE.COM TO SEE THE MR-1000 FORZA INSTRUCTIONAL VIDEO

WHEEL INSTALLATION

Install the rear wheels using the supplied tools along

with the supplied wheel bolt, washers, and lock nut.

The wheel bolt is inserted into the wheel followed by a

washer then inserted into the steamer wheel mount.

Once inserted, install the other washer and the lock nut.

Tighten lock nut. (Fig.1)

Wheel bolt

Lock bolt

Once unpacked the only items that need to be installed are the rear wheels, the storage

basket, and the rear handles. All the necessary tools and hardware are included to

install these items.

Fig.1

BASKET & HANDLES

Fig.2

Bolt

Cord

reel

Cord

reel

CORD REEL

The basket and handles are secured to the main steamer

body using 6 of the supplied Allen head style screws.

(*Note: there are extra Allen head screws provided).

Align the basket and handle screw hole locations and

insert the Allen head screws loosely until all screws are

in place. Once all screws are in place Secure all screws

rmly with the supplied Allen tool. (Fig.2)

The cord reel hooks rotate by pulling outward from the steamer then twisting to rotate.

Use this rotate function to easily remove the power cord and to position the hooks for

cord storage. Use the Velcro cord strap to secure the cord during transport. (Fig.2)

Washer

Forza

Always ensure the steamer is on a level oor or at surface when in

At rst start up and when relling the cold water tank when empty you will

hear the pump ll the boiler from the cold water tank. Once the pump is running hold

the steam gun trigger down for 15-20 seconds to release the air trapped in the boiler.

operation. Do not tip or tilt the steam cleaner during use.

1 2 3 4 5 6 7 8 9 ... 13 14

Keine Kommentare

Vapamore MR-1000 Forza Bedienungsanleitung Seite 4